Is There a Recall on the 2025 Toyota Tacoma for Driveshaft or Brake Line Issues?

November 10th, 2026 by

2025 Toyota Tacoma on a lift for driveshaft and rear brake hose recall inspection at Legacy Toyota of Dallas

Yes. Toyota has issued safety recall campaigns affecting select 2025 Toyota Tacoma trucks for both front driveshaft integrity (NHTSA campaign 25V656) and rear brake hose durability (NHTSA campaign 25V058). Three more campaigns also touch the 2025 Tacoma. Every recall inspection and any replacement work it calls for is performed at no cost to you.

2025 Toyota Tacoma Recall Campaigns at a Glance

Campaign What’s affected The defect Remedy Remedy status
25V656 (Toyota 25TB11 / 25TA11) 2025 Tacoma and Tacoma Hybrid, approximately 5,960 trucks Front driveshaft constant-velocity joint ball cage may deform and break Inspect both front driveshaft assemblies and replace as necessary Available — see your dealer
25V058 (Toyota 25TB04 / 25TA04) 2024–2025 Tacoma, 4WD and 2WD, 16-inch brakes with 17- or 18-inch rear wheels, approximately 221,846 trucks Mud and dirt inside the rear wheels can damage the rear brake hoses, causing a fluid leak Replace both rear brake hoses with improved parts Available — see your dealer
25V595 2024–2025 Tacoma with a 12.3-inch combination meter, approximately 107,983 trucks Meter software wears out a memory device early; the display may stay blank at startup Dealer updates the combination meter programming Available — see your dealer
26V179 2024–2025 Tacoma and Tacoma Hybrid, approximately 8,230 units across all affected Toyota and Lexus models Load carrying capacity modification label may show inaccurate added weight values (FMVSS No. 110) Replace the label Available — see your dealer
26V514 (Toyota 26TB14 / 26TA14) 2024–2025 Tacoma and 2024 Tacoma Hybrid built January 2 to November 25, 2024, approximately 48,280 trucks Corrosion stresses the welds holding the shock absorber oil reservoir, which can detach while driving Replace front and rear shock absorber assemblies Interim notice only; final remedy anticipated March 2027

Which Recalls Affect the 2025 Toyota Tacoma?

Front Driveshaft Recall (NHTSA 25V656)

Front driveshaft constant-velocity joint ball cages were made from the wrong tube material at a sub-supplier. The affected production traces to a single day in January 2025. Toyota estimates roughly 16 percent of the recalled trucks actually contain an affected part. A ball cage made from the wrong material may deform or break under normal driving. A driver may find steering rotation limited and be unable to finish a turn. On full-time 4WD models, a broken ball cage may also let the truck move while in Park if the electronic parking brake is not set. Dealers inspect the serial numbers on both front driveshaft assemblies and replace either or both at no charge.

Rear Brake Hose Recall (NHTSA 25V058)

This campaign covers a wider population than many owners expect. Mud and dirt can build up inside the rear wheels and press against the rubber brake hoses, wearing through them over time. A brake fluid leak can reduce braking ability and increase the risk of a crash. Toyota’s amended filing covers roughly 221,846 trucks across the 2024 and 2025 model years. It includes both four-wheel-drive and two-wheel-drive models with 16-inch brakes and 17- or 18-inch rear wheels, built between December 14, 2023 and January 17, 2025. Trucks built with 17-inch brakes use a different brake design and are not included. Until the remedy is performed, Toyota advises owners to clean the rear wheel area after off-road driving.

Instrument Panel, Label and Shock Absorber Campaigns

NHTSA campaign 25V595 covers combination meter software that keeps writing unnecessary data to a memory device. That wears the device out early, and the 12.3-inch display may stay blank at startup. A blank display can hide brake system and tire pressure warnings. NHTSA campaign 26V179 covers a load carrying capacity modification label that may display inaccurate added weight values, a noncompliance with Federal Motor Vehicle Safety Standard No. 110.

The newest campaign is NHTSA 26V514, filed in August 2026 and covering approximately 48,280 Tacoma and Tacoma Hybrid trucks built between January 2 and November 25, 2024. Untreated metal on certain front and rear shock absorbers can corrode. The corrosion stresses the welds that hold the external oil reservoir, and the reservoir can come loose while driving. Toyota mailed owner notification letters between September 21 and October 5, 2026. Dealers will replace the front and rear shock absorber assemblies with improved ones at no charge, though the final remedy is not anticipated until March 2027. If that letter arrived this fall, your truck is already identified. Our service team can confirm where your VIN sits in the remedy schedule.

How Can Dallas Owners Check if Their 2025 Tacoma Has an Open Recall?

Dallas owners can check their truck in a few minutes. Enter its 17-character Vehicle Identification Number into the official NHTSA recall lookup or Toyota’s recall campaign portal. Each campaign is tied to a specific production window and build, so not every 2025 Tacoma is affected by every recall.

Your VIN appears in four places:

  • Through the lower driver-side corner of the windshield
  • On your state vehicle registration document
  • On your auto insurance card
  • On the safety certification label in the driver-side door jamb

Once you enter the code, the lookup displays any unrepaired safety campaigns attached to that specific vehicle. Toyota does mail recall notification letters to registered owners by first-class mail, but there is no fixed 60-day deadline. Federal rules require only that notice go out within a reasonable time. These Tacoma campaigns show how long that can take. The rear brake hose recall was filed in February 2025, and the last groups of affected owners were not scheduled for notification until the end of August 2025. Do not wait on the mail. A VIN lookup gives you current campaign status today, and you can also check your VIN against open Toyota safety campaigns through our recall page.

What Are the Danger Signs and Driving Risks of a Recall-Affected 2025 Tacoma?

Driving a 2025 Toyota Tacoma with an uninspected driveshaft or brake line defect introduces real mechanical and road safety risk. Damaged hydraulic lines can cause brake fluid loss and extended stopping distances, while a failed front driveshaft assembly can compromise power delivery and steering stability. These are the symptoms worth paying attention to.

Soft Brake Pedal

A spongy pedal that requires deeper pressure to slow the truck down.

Warning Light

A brake system warning light or master warning icon on the instrument cluster.

Fluid Pooling

Clear-to-amber brake fluid pooling near the inside of the rear tires.

Driveline Vibration

Vibration under acceleration, especially when towing or hauling a load.

Front Axle Noise

Metallic clunking or binding from the front axle during sharp low-speed turns.

If you experience any of these symptoms, avoid highway speeds and do not tow. Should fluid loss become severe, pull over safely and arrange roadside assistance to transport the truck to a certified technician rather than driving it in.

The information in this article is general guidance and does not constitute a specific diagnostic or repair recommendation for any individual vehicle. Repair and maintenance decisions should be made in consultation with a certified technician based on the specific condition of your vehicle.

Can Dallas Tacoma Owners Get Recall Repairs Done for Free at a Local Toyota Dealer?

Yes. Consumers are entitled to a safety recall remedy without charge. Manufacturer agreements require franchised dealers to honor recalls at no extra cost, no matter where the vehicle was bought. Federal rules give the manufacturer the choice of repairing the vehicle at no charge, replacing it, or refunding the purchase price. For these Tacoma campaigns, the remedy is repair.

When you bring your truck in for recall work, there are no diagnostic charges or deductibles attached to the campaign itself. If an inspection confirms that a recalled front driveshaft assembly or rear brake hose requires replacement, the parts and installation labor are covered.

For appointments that require extended shop time, ask our service team about rental vehicles. A shuttle service is also available to take you to nearby locations during your visit.

What Happens During the Tacoma Recall Inspection?

A recall appointment begins with an inspection by certified technicians following Toyota’s repair protocol for your truck’s specific campaign. How long it takes depends on which campaigns are open against your VIN, whether parts are on hand, and shop flow on the day. The work itself varies by campaign.

Campaign What the technician does
Rear brake hose (25V058) Raises the vehicle to inspect both rear brake line assemblies, clears accumulated mud and debris from inside the wheels, and checks the hoses for chafing. Both rear brake hoses are replaced with improved components, then the hydraulic system is bled and refilled.
Front driveshaft (25V656) Inspects the serial numbers on both front driveshaft assemblies and replaces either or both if they came from the affected production period.
Instrument panel (25V595) Updates the combination meter programming at the dealership to correct the startup fault.
Load carrying capacity label (26V179) Replaces the label with a corrected version showing accurate added weight values.

The information in this article is general guidance and does not constitute a specific diagnostic or repair recommendation for any individual vehicle. Repair and maintenance decisions should be made in consultation with a certified technician based on the specific condition of your vehicle.

Once the work is finished, the technician verifies the repair and updates Toyota’s central database to close the open campaign against your VIN.

Frequently Asked Questions About 2025 Toyota Tacoma Recalls

Is my 2025 Tacoma automatically unsafe to drive if a recall notice appears online?

An open recall means your vehicle falls within a production population identified as carrying a known defect risk. It does not mean your truck has already suffered a component failure. If your Tacoma shows no symptoms, meaning no fluid leaks, no pedal softness and no driveline vibration, most owners continue driving while they arrange a service visit. Because the consequences of these particular defects involve steering and braking, schedule the inspection promptly rather than waiting, and call us before driving if symptoms are present.

The information in this article is general guidance and does not constitute a specific diagnostic or repair recommendation for any individual vehicle. Repair and maintenance decisions should be made in consultation with a certified technician based on the specific condition of your vehicle.

What should I do if my dealer is waiting on backordered recall parts?

If replacement hardware is on backorder, technicians can inspect your current components to assess their condition. Campaign 26V514 is the clearest example: owner letters went out in the fall of 2026, but the final shock absorber remedy is not anticipated until March 2027. Interim letters like that one identify your truck in Toyota’s system ahead of parts availability. If active damage is found during an inspection, our service department will advise on precautions and can discuss rental options while you wait for parts.

Are recall repairs still free if my Tacoma has exceeded its bumper-to-bumper warranty?

Safety recall campaigns operate independently of factory warranty limits, and there is no mileage cap on a recall repair. There is an age limit: under federal rules, the vehicle cannot be more than 15 years old on the date the defect or noncompliance is determined. A 2025 Tacoma sits well inside that window, so the expiration of Toyota’s 36-month/36,000-mile basic warranty has no bearing on your eligibility for these recall repairs.

This information is provided for general educational purposes only and does not constitute legal advice. Warranty coverage depends on the specific terms of your vehicle’s warranty agreement. Consult your owner’s manual or a qualified legal professional for guidance on your individual situation.

How can second owners make sure they receive future recall notices for a used 2025 Tacoma?

Recall notices go to the registered owner on file. If you bought your truck from a private seller or an independent lot, update your ownership information with Toyota or ask a franchise service department to help you do it, so future safety campaign letters reach you directly.

Schedule Your 2025 Tacoma Recall Inspection in Dallas Today

Open safety campaigns are worth addressing as soon as they are announced. At Legacy Toyota of Dallas, our certified technicians use genuine OEM parts to resolve driveshaft, brake line, instrument panel, label and shock absorber campaigns on the Tacoma.

To confirm your VIN status or book an appointment, call our service center at 945-758-1471 or visit us at 39660 Lyndon B Johnson Fwy, Dallas, TX 75237. For related service reading, our 2025 Toyota RAV4 Recall Guide covers campaign 25V595 as it applies to the RAV4, and our Toyota maintenance schedule breaks down routine service intervals.

Disclaimers

The information in this article is general guidance and does not constitute a specific diagnostic or repair recommendation for any individual vehicle. Repair and maintenance decisions should be made in consultation with a certified technician based on the specific condition of your vehicle.

This information is provided for general educational purposes only and does not constitute legal advice. Warranty coverage depends on the specific terms of your vehicle’s warranty agreement. Consult your owner’s manual or a qualified legal professional for guidance on your individual situation.

Posted in service